Tile Adhesive Manufacturing Plant

The complete set of tile adhesive manufacturing plant is integrated equipment for automatic loading, mixing discharging, and packaging of various dry adhesive. A tile adhesive plant can not only produce tile adhesive, but also various types of dry mortar such as thermal insulation mortar, anti-crack mortar, bonding mortar, plastering mortar, masonry mortar, waterproof mortar, polystyrene particle mortar, etc.

tile adhesive manufacturing plant

Classification of Aimix tile adhesive production line

The production line of tile adhesive produced by Aimix can be divided into tower type, ladder type, and station type. According to different products, it can be divided into production lines with an annual output of 30000-50000 tons, 50000-100000 tons, 100000-150000 tons, 150000-200000 tons, 200000-300000 tons, and 300000-400000 tons.
Each set of tile adhesive production line adopts a computer automatic batching device with high automation. The finished products can be packed in bags or shipped in bulk, provide a wide choice for customers.tile adhesive plant

Hot Types of Aimix Tile Adhesive Manufacturing Plant

Models GJ05 GJ10 GJ15 GJ20 GJ30
Production Capacity (T/H ) 5 10 15 20 30
Control System  Semi-auto/Full-auto  Semi-auto/Full-auto  Semi-auto/Full-auto  Semi-auto/Full-auto  Semi-auto/Full-auto
Models GJ40 GJ50 GJ60 GJ80 GJ100
Production Capacity (T/H ) 40 50 60 80 100
Control System  Semi-auto/Full-auto  Semi-auto/Full-auto  Semi-auto/Full-auto  Semi-auto/Full-auto  Semi-auto/Full-auto

Aimix Tile Adhesive Plant Exported to Oversea Countries

Aimix tile adhesive plant in Indonesia
Aimix tile adhesive plant in Indonesia
Aimix tile adhesive plant set up in Zambia
Aimix tile adhesive plant set up in Zambia

Main Components of Tile Adhesive Manufacturing Plant

Raw material storage equipment
Cement silos are used to store bulk raw materials

cement silo
Batching device
It is composed of a hopper scale, discharging device, micro material adding device, and computer control system. It can automatically measure different raw materials according to the formula, reduce labor intensity and environmental pollution, and ensure the product quality of dry mortar.
Dry Mortar Mixer
Mixers are available in a variety of options such as double helix cone mixers, coulter mixers, ribbon mixers, twin-shaft gravity-free mixers etc.
The requirements for the tile bond making machine are: uniform mixing, no dead angle, high efficiency, wear resistance of the equipment, and fast discharge speed. Among the above mixers, widely used are twin-shaft gravity-free mixer and coulter mixer.dry mortar mixer
Recommended: Gravity-free mixer suitable for dry powder mixing, you can also add “flying knife” as required. Coulter Mixer – suitable for mixing and dosing with fiber materials.
Packaging machine
There are open pockets and valve pockets. The valve pocket packing machine is widely used, because the valve pocket packing does not need to be seamed and can be operated by one person, but this packing machine is not suitable for packing light materials, the cost of the bag is slightly higher, but the packing speed is fast. The open bag packing machine can pack all kinds of materials, but it needs seam after packing. The cost of the bag is relatively low (the bag can be recycled), but the packaging speed is slightly slow. Compared with the valve pocket packing machine, one more operator is needed. Customers can choose either one according to the actual demand.
Dust collector
It is used to recycle dust from the tile adhesive manufacturing plant and is environmentally friendly. It is generally located at the top of the cement silo, at the feed port of the hoist, etc.
Recommended equipment: pulse dust collector, bag dust collectordust remover
Conveying and lifting equipment:
The material conveying methods used in the tile adhesive making machine are: horizontal conveying and vertical conveying, horizontal conveying can adopt screw conveyor, vertical conveying generally adopts bucket elevator.bucket elevator

Service Aimix provides:

    1. Free services such as site planning, equipment installation and debugging, personnel training;
    2. Design the most suitable tile adhesive plant layout to reduce the cost;

sincere service

  1. Returning visit for each set equipment after installation by the specialized department;
  2. We offer the original, authentic, quality spare parts for equipment maintenance.

Recent Customer Feedback

In January 2021, one of our customers from Peru ordered a set of tile adhesive plant. We quickly arranged to load and sent the plant to Peru. The plant soon arrived and was put into use.

In recent days, our customer send us some feedback pictures of this tile adhesive plant. The plant works very well and our customers speak highly of it. It brings convenience to our customer’s construction work and helps to increase the working efficiency. The following are the pictures taken on the working site.

AIMIX tile adhesive plant in Peru
AIMIX tile adhesive plant in Peru
AIMIX tile adhesive plant
AIMIX tile adhesive plant

To serve customers better and faster, Aimix has set more than 5 branch offices in overseas countries such as Pakistan, the Philippines, Uzbekistan, Indonesia. We have overseas warehouses and factories there. Customers will be able to get our product faster and get faster after-sale service.
Aimix has exported many sets tile bond making machine to overseas countries such as Pakistan, Sri Lanka, Zambia, Indonesia etc. We have rich experience in export. We have tens of plants inside our country for customers to visit. If you are interested in our tile adhesive making machine, please don’t hesitate to contact us now! Leave your questions or requirement in the form below, we will reply in 24 hours!

    Please feel free to give your inquiry in the form below. We will reply in 24 hours.
    Your Name(required):

    Product Model:

    Your Email(required):

    Your Tel(required):

    Your country:

    Your Company:

    Your Message(required):